SKU 8092 is an N42 neodymium disk magnet measuring 3.2 mm in diameter × 0.75 mm thick, with Ni-Cu-Ni plating. Axial magnetization places its poles on the two flat circular faces. The small, thin metric profile can be considered for compact fixtures, closures or magnetic sensing assemblies.
Specifications
| Magnet Size: |
3.2 mm × 0.75 mm |
| Tolerances: |
±0.004" |
| Material: |
Rare Earth NdFeB |
| Grade of Neodymium: |
N42 |
| Plating/Coating: |
Ni-Cu-Ni |
| Br (typical): |
13,150 Gauss |
| BHmax (typical): |
42 MGOe |
| Max Temperature: |
80°C / 176°F |
| Magnetization Direction: |
Axial |
| Surface Gauss: |
2,758.82 Gauss |
| Pull Force: |
0.33 lb |
Design notes for SKU 8092
Check the diameter, thickness and listed tolerance against the mounting pocket before specifying this small disk. Account for adhesive layers and housing walls in the working gap. For sensing applications, validate the field at the actual sensor position rather than treating a listed surface field as the field throughout the assembly.
Check the complete assembly at the intended air gap and loading direction. Listed pull force is a comparison value, not a safe working load; target steel thickness, contact area and surface condition affect actual holding force. Provide clearance in the housing and protect the brittle magnet from impact during installation.
The listed maximum temperature is 80°C. Validate the complete magnetic circuit at the intended operating conditions, including opposing fields and required performance. Check adhesives and housing materials against their own limits. Protect the nickel coating from damage and prevent the magnet from snapping into other parts during installation.
Compare magnetic strength and temperature classes in our neodymium grades chart. Explore gap effects using the pull-force calculator, or send your drawing, operating conditions and volume through the Magnet RFQ Builder.
Compare alternate sizes in our disk and rod magnet range.
