9119 – N35 Countersunk Bar Magnet 2.5 × 0.75 × 0.375 in

SKU 9119 is an N35 neodymium bar magnet measuring 2.5" × 0.75" × 0.375" with #8 countersunk mounting holes. It combines a long rectangular magnetic face with mechanical fastening points for fixtures, brackets, removable steel-surface assemblies and other applications where adhesive-only retention is not preferred.

Specifications

Countersunk Bar Magnet Design Notes

The magnet is magnetized through its thickness, so the large 2.5" × 0.75" faces are the working pole faces. The countersunk holes allow mechanical fastening, but sintered NdFeB is hard and brittle; avoid excessive screw torque, point loading and impacts that can chip or crack the magnet.

The listed 61.66 lb pull-force figure is a comparison/test value under defined contact conditions, not a universal safe working load. Paint, coatings, air gap, thin target steel, imperfect contact and especially vertical shear loading can reduce usable holding force.

For force screening, use the Magnet Pull Force Calculator. For other steel-surface mounting geometries, browse Pot & Mounting Magnets.

Browse all Neodymium Block & Bar Magnets or use the Magnet RFQ Builder for custom bar dimensions, hole patterns, grades, coatings or magnetization requirements.