9668 – N35 Epoxy Bar Magnet 2.36″ x 0.53″ x 0.20″ with #4 Countersunk Holes

SKU 9668 is an epoxy-coated N35 neodymium bar magnet measuring 2.36 × 0.53 × 0.20 in (60 × 13.5 × 5 mm) with #4 countersunk mounting holes. It is magnetized through the thickness and designed for engineers, OEMs, and procurement teams that need a mechanically mountable bar magnet with an added corrosion barrier for fixtures, equipment, closures, and production assemblies.

Specifications

Mounting and coating considerations

The epoxy coating provides an additional corrosion barrier, while the countersunk holes allow direct mechanical mounting. Protect the coating from chips and abrasion, and avoid excessive fastener torque because sintered neodymium is brittle around drilled and countersunk features.

The listed pull force is a reference value under defined contact conditions. Fastener seating, air gap, target-steel thickness, contact area, surface finish, temperature, and shear loading all affect actual performance. Use the Magnet Pull Force Calculator for preliminary screening and browse pot and mounting magnets for related mechanically mounted assemblies.

Procurement and custom countersunk magnets

Compare grades with the Neodymium Magnet Grades Chart, or use the Magnet RFQ Builder for custom bar dimensions, hole geometry, epoxy systems, tolerances, magnetization, or production quantities.