Gold-plated N48 neodymium magnet with listed dimensions of 0.0354 × 0.147 inch and axial magnetization. Review dimensional requirements for your assembly. SKU 9213.
The small geometry can be considered for compact assemblies where space and field orientation are selection factors. Confirm the dimensional drawing and required tolerance against the mounting feature before ordering production quantities.
Specifications
| Magnet Size: |
0.0354" x 0.147" |
| Tolerances: |
±0.004" |
| Material: |
Rare Earth NdFeB |
| Grade of Neodymium: |
N48 |
| Plating/Coating: |
Gold plated |
| Br (typical): |
14,000 Gauss |
| BHmax (typical): |
49 MGOe |
| Max Temperature: |
80°C / 176°F |
| Magnetization Direction: |
Axial |
| Surface Gauss: |
2,758.82 Gauss |
| Pull Force: |
0.33 lb |
Design and assembly guidance
Protect the gold-plated surface during installation and validate compatibility with the actual contact materials and operating environment. For a sensing application, check the magnetic field at the intended sensor location; a listed surface field does not describe the field at every working distance.
Listed pull force is a comparison value rather than a safe working load. Target steel thickness, air gaps, coatings, alignment and loading direction affect actual retention. Test the complete assembly under its intended conditions before production. Protect the brittle magnet from impact and avoid an interference fit that could chip or crack it.
The listed maximum magnet temperature is 80°C. Allowable operation depends on the magnetic circuit, opposing fields and required performance. Validate the assembled device at its intended temperature and check adhesives and housing materials against their own limits.
Compare materials in our neodymium grades chart, explore working gaps with the pull-force calculator, and browse related magnet sizes. Send drawings, operating conditions and quantities through the Magnet RFQ Builder for application-specific sourcing.
