N35 Neodymium Disk Magnet 1 × 7/32 in – SKU 8908

SKU 8908 is an N35 neodymium disk magnet measuring 1 inch diameter × 7/32 inch thick, with Ni-Cu-Ni plating. The broad circular faces can be useful in fixtures, closures and retention assemblies after checking the required force and available space.

Specifications

Design notes for SKU 8908

Axial magnetization places the poles on the two 1-inch circular faces. Align the pole face with the intended steel target, and allow clearance in the housing instead of forcing the disk into a tight bore. Secure the assembly and control attraction during installation.

Check the complete assembly at the intended air gap and loading direction. Listed pull force is a comparison value, not a safe working load; target steel thickness, contact area and surface condition affect actual holding force. Provide clearance in the housing and protect the brittle magnet from impact during installation.

The listed maximum temperature is 80°C. Evaluate the complete magnetic circuit at the intended operating temperature, including opposing fields and required performance. Check any adhesive or housing material against its own limits. Use controlled handling and keep the plated or coated surface protected during assembly.

Compare magnetic strength and temperature classes in our neodymium grades chart. Explore gap effects using the pull-force calculator, or send your drawing, operating conditions and volume through the Magnet RFQ Builder.

Compare alternate dimensions in our disk and rod magnet range.