9312 – N35 Neodymium Hook Pot Magnet E25, 25 mm

N35 neodymium E25 pot magnet with hook, listed size 25 mm and Ni-Cu-Ni coating. Listed pull force: 28.1 lb; usable hanging capacity depends on mounting conditions. SKU 9312.

The hook provides an attachment point for removable fixtures and hanging arrangements on suitable steel surfaces. Select the mounting orientation and target surface before evaluating the required load.

Specifications

Design and mounting guidance

The listed pull-force figure does not establish a universal hanging-load capacity. Sideways loads, wall mounting, thin steel, paint and gaps can substantially change retention. Check hook engagement, load direction and the complete attachment under intended conditions. Avoid shock loads and verify a suitable margin for the application.

Listed pull force is a comparison value rather than a safe working load. Target steel thickness, air gaps, surface condition and loading direction affect actual retention. Test the complete assembly under its intended conditions before production.

The listed maximum magnet temperature is 80°C. Allowable operation depends on the magnetic circuit, opposing fields and required performance. Check adhesives and housing materials against their own limits, and protect the magnet and coating from impact during installation.

Compare the neodymium grades chart, review the temperature derating calculator, or browse related magnet sizes. Submit drawings, operating conditions and quantities through the Magnet RFQ Builder.