N35 Neodymium Disk Magnet 15 × 2 mm – SKU 9350

N35 neodymium disk magnet, 15 mm diameter × 2 mm thick, with Ni-Cu-Ni plating and axial magnetization. Listed pull force: 3.51 lb. SKU 9350.

Axial magnetization places the poles on the two flat circular faces. This thin metric disk can be considered for compact closures, fixtures and sensing assemblies where a broad contact face and limited thickness are useful.

Specifications

Design and mounting guidance

Check the diameter and tolerance against the mounting pocket, and include adhesive layers or housing walls in the working gap. Support the thin disk during assembly to avoid bending or chipping. For sensing applications, verify the magnetic field at the sensor position rather than relying only on the listed surface field.

Listed pull force is a comparison value rather than a safe working load. Target steel thickness, air gaps, surface condition and loading direction affect actual retention. Test the complete assembly under its intended conditions before production.

The listed maximum magnet temperature is 80°C. Allowable operation depends on the magnetic circuit, opposing fields and required performance. Check adhesives and housing materials against their own limits, and protect the magnet and coating from impact during installation.

Compare the neodymium grades chart, review the temperature derating calculator, or browse related magnet sizes. Submit drawings, operating conditions and quantities through the Magnet RFQ Builder.