SKU 9348 is an N35 neodymium block magnet measuring 60 × 10 × 3 mm with 3M adhesive on the north-pole face. Magnetized through the 3 mm thickness, this long low-profile bar is designed for engineers, OEMs, and procurement teams sourcing adhesive-backed magnets for mounting, displays, fixtures, positioning, closures, and light industrial assemblies.
Specifications
| Magnet Size |
60 × 10 × 3 mm |
| Tolerance |
±0.004 in |
| Material |
NdFeB |
| Grade |
N35 |
| Coating |
Ni-Cu-Ni |
| Adhesive |
3M adhesive on north-pole face |
| Magnetization |
Through the 3 mm thickness |
| Listed Remanence (Br) |
12,100 gauss |
| Listed Surface Field |
5,481.05 gauss |
| Listed Maximum Energy Product |
35 MGOe |
| Listed Pull Force |
17.66 lb |
| Approximate Magnet Weight |
0.476 oz |
| Listed Maximum Temperature |
80°C / 176°F |
Adhesive mounting and application notes
Through-thickness magnetization places the poles on the two broad 60 × 10 mm faces. The 3 mm profile keeps the part thin while the 60 mm length provides an elongated magnetic footprint for rails, display elements, fixtures, access panels, alignment features, and embedded assemblies.
The listed pull force describes the magnet under specific test conditions and does not represent the adhesive bond strength. Surface preparation, substrate type, temperature, loading direction, and cure conditions all affect the adhesive interface. Use the Magnet Pull Force Calculator for magnetic screening and the Neodymium Magnet Grades Chart when comparing material grades.
Procurement and custom adhesive-backed blocks
SKU 9348 is well suited to repeat builds where a long, thin adhesive-backed magnet simplifies installation. Browse stocked block and bar magnets for related geometries, or use the Magnet RFQ Builder for custom dimensions, adhesive systems, coatings, tolerances, magnetization, or production quantities.
