9754 – N35 Neodymium Cube Magnet 1″ x 1″ x 1″

SKU 9754 is an N35 neodymium cube magnet measuring 1 inch × 1 inch × 1 inch. It is magnetized through its thickness and protected with a Ni-Cu-Ni coating.

Specifications

1-Inch Neodymium Cube Magnet Technical Notes

This cube magnet has a measured surface field of 4,797.58 gauss and a listed pull force of 84.92 lb under the stated test conditions. Its maximum operating temperature is 80°C (176°F).

Installed holding performance depends on contact area, target-steel thickness, surface condition, and air gap. This magnet can produce strong pinch forces; use appropriate handling controls and keep it separated from other strong magnets and ferromagnetic objects. Use our magnet pull force calculator when comparing operating conditions, or browse our full selection of block and bar magnets.

For fixtures, prototypes, and production assemblies, confirm pole orientation, mounting geometry, adhesive selection, and dimensional stack-up. The listed pull force is a comparison value rather than a guaranteed safe working load. Air gaps, thin target steel, surface roughness, and shear loading can reduce usable force. Sintered neodymium is brittle, so avoid impacts and uneven clamping.

Compare material options in the neodymium magnet grade chart or submit the magnet RFQ builder for volume pricing or custom requirements.