SKU 8113 is an N35 neodymium block magnet measuring 1.8 × 1.5 × 0.50 inch, with Ni-Cu-Ni plating and 3/32-inch radius eased edges. It is magnetized through the 1.5-inch width, placing the poles on the opposing 1.8 × 0.50-inch faces.
Specifications
| Magnet Size: |
1.8" × 1.5" × 0.50" |
| Tolerances: |
±0.004" |
| Material: |
Rare Earth NdFeB |
| Grade: |
N35 |
| Coating: |
Ni-Cu-Ni |
| Br (typical): |
12,100 Gauss |
| BHmax (typical): |
35 MGOe |
| Max Temperature: |
80°C / 176°F |
| Magnetization: |
Through width (1.5") |
| Surface Gauss: |
4,961.82 Gauss |
| Pull Force: |
120.84 lb |
| Edge Treatment: |
3/32" radius eased edges |
Design notes for SKU 8113
The eased edges are a specified geometry feature; review the drawing when checking clearance against a housing or fixture. Orient the width-magnetized pole faces toward the intended target. Its listed 120.84 lb pull requires controlled handling, secure fixtures and clearance to prevent sudden attraction or pinching.
Check the complete assembly at the intended air gap and loading direction. Listed pull force is a comparison value, not a safe working load; target steel thickness, contact area and surface condition affect actual holding force. Provide clearance in the housing and protect the brittle magnet from impact during installation.
The listed maximum temperature is 80°C. Validate the complete magnetic circuit at the intended operating conditions, including opposing fields and required performance. Check adhesives and housing materials against their own limits. Protect the nickel coating from damage and prevent the magnet from snapping into other parts during installation.
Compare magnetic strength and temperature classes in our neodymium grades chart. Explore gap effects using the pull-force calculator, or send your drawing, operating conditions and volume through the Magnet RFQ Builder.
Compare alternate sizes in our block and bar magnet range.
