Ceramic VIII Ferrite Block Magnet 48 × 22 × 6.3 mm – SKU 8373

SKU 8373 is a Ceramic VIII ferrite block magnet measuring 48 mm × 22 mm × 6.3 mm. Ferrite is a cost-effective permanent-magnet material with excellent inherent corrosion resistance, making this block useful for industrial, motor, holding, separation and production applications where neodymium-level energy density is not required.

Specifications

Ferrite Block Design Notes

The listed pull-force value is a comparison/test value, not a universal safe working load. Actual holding force depends on target steel thickness and material, air gap, surface condition, contact area, alignment and load direction.

Ferrite blocks are attractive for cost-sensitive production programs because they normally do not require protective metallic plating and can perform well in humid or corrosive environments. If you are comparing this part with NdFeB, review our Ferrite vs. Neodymium guide.

Support this brittle ceramic block in its housing and avoid forcing it into a tight press fit. Keep contact faces clean and check the complete assembly at its intended gap and operating temperature before committing to production. Use our magnet pull-force calculator to explore how geometry and clearance affect a preliminary selection.

Bulk & OEM Ferrite Magnet Sourcing

For recurring production demand, alternate ferrite geometries, custom magnetization or annual-volume pricing, use the Magnet RFQ Builder. You can also browse all Ceramic / Ferrite Magnets.