N35 Neodymium Disk Magnet 1/2 × 1/4 in – SKU 8176

SKU 8176 is an N35 neodymium disk magnet measuring 1/2 inch in diameter × 1/4 inch thick. It is axially magnetized, placing the north and south poles on the two flat circular faces. Its compact proportions suit closures, fixtures, sensors, displays, prototypes, and production assemblies.

Specifications

Design notes for disk magnets

Confirm pole orientation, operating air gap, target-steel thickness, adhesive selection, and dimensional stack-up in the final assembly. Sintered neodymium magnets are hard and brittle, so avoid impact, snap-together collisions, uneven clamping, and excessive mechanical stress.

The listed 9.41 lb pull force is a comparison value under defined contact conditions, not a guaranteed safe working load. Air gaps, surface roughness, coating, thin target steel, and shear loading can reduce usable force.

Use the magnet pull force calculator for preliminary magnet-to-steel screening and compare material options in the neodymium magnet grades chart. Browse our magnet catalog or submit the magnet RFQ builder for volume pricing or a custom requirement.