8016 – N35 Neodymium Block Magnet 3 × 2 × 1/2 in

SKU 8016 is an N35 neodymium block magnet measuring 3 × 2 × 1/2 inches. It is magnetized through the 1/2-inch thickness, placing the north and south poles on the two broad 3 × 2-inch faces. Its large rectangular footprint suits industrial holding, fixtures, separation equipment, prototypes, and production assemblies requiring substantial contact area. The Ni-Cu-Ni coating provides a metallic finish over the sintered NdFeB material.

Specifications

Design notes for this large N35 block magnet

Plan the mounting arrangement and handling method before bringing this magnet near steel or another magnet. Strong attraction can create pinch hazards and damaging impacts. Use controlled installation methods, appropriate spacing, and suitable guarding. Sintered neodymium magnets are hard and brittle, so avoid snap-together collisions, uneven clamping, drilling, and mechanical shock.

The listed 208.06 lb pull force is a comparison value under defined direct-contact conditions, not a guaranteed safe working load. Air gaps, target-steel thickness, surface roughness, coating, shear loading, and mounting geometry can reduce usable force. Validate holding performance in the final assembly.

Use the magnet pull force calculator for preliminary screening and compare materials in the neodymium magnet grade chart. Browse more neodymium block magnets, or submit the magnet RFQ builder for volume pricing or a custom requirement.