N35 Neodymium Pot Magnet 1.19 × 0.19 in – SKU 8648

N35 neodymium pot magnet measuring 1.19 inch diameter × 0.19 inch thick, with Ni-Cu-Ni coating. Listed pull force: 12.05 lb. SKU 8648.

The circular pot geometry can be considered for compact fixtures and removable steel-surface mounting assemblies. Check the available mounting space, contact surface and retention requirements before selecting this part.

Specifications

Design and assembly guidance

Align the working face with the target steel and keep the contact area clean. Paint, coatings, surface unevenness and thin steel can reduce available retention. Evaluate sliding loads separately from direct pull-off loads and validate the complete mounting arrangement in its intended orientation.

The listed maximum magnet temperature is 80°C. Allowable operation depends on the magnetic circuit, opposing fields and required performance. Validate the complete assembly at its intended temperature and check adhesives and housing materials against their own limits.

Protect the brittle magnet and plated surface during handling. Provide clearance instead of forcing an interference fit. Listed pull force is a comparison value rather than a safe working load; air gaps, target steel and load direction affect actual retention.

Review the neodymium grades chart, explore thermal effects with the temperature derating calculator, or compare related magnet sizes. Send your drawing, operating conditions and quantities through the Magnet RFQ Builder.