N35 Neodymium Block Magnet 3/8 × 3/8 × 1/16 in – SKU 8905

SKU 8905 is an N35 neodymium block magnet measuring 3/8 × 3/8 × 1/16 inch. It is magnetized through the 1/16-inch thickness, placing the north and south poles on the two broad 3/8 × 3/8-inch faces. Its thin square profile suits closures, fixtures, sensors, displays, prototypes, and production assemblies.

Specifications

Design notes for thin block magnets

Confirm pole orientation, operating air gap, target-steel thickness, adhesive selection, and dimensional stack-up in the final assembly. Sintered neodymium magnets are hard and brittle, so avoid impact, snap-together collisions, uneven clamping, and excessive mechanical stress.

The listed 4.87 lb pull force is a comparison value under defined contact conditions, not a guaranteed safe working load. Air gaps, surface roughness, coating, thin target steel, and shear loading can reduce usable force.

Use the magnet pull force calculator for preliminary magnet-to-steel screening and compare material options in the neodymium magnet grades chart. Browse our magnet catalog or submit the magnet RFQ builder for volume pricing or a custom requirement.