9417 – Neodymium Magnet Block N35 Epoxy Coated 60MM x 10MM x 3MM(A)

SKU 9417 is an epoxy-coated N35 neodymium block magnet measuring 60 × 10 × 3 mm. Magnetized through the 3 mm thickness, this long low-profile block is intended for engineers, OEMs, and procurement teams sourcing corrosion-conscious magnets for linear fixtures, sensors, closures, prototypes, and embedded assemblies.

Specifications

Design and coating considerations

The epoxy layer over the Ni-Cu-Ni plating provides an additional corrosion barrier, but the coating should still be protected from edge impacts, abrasion, and chips during handling and assembly. Through-thickness magnetization places the poles on the broad 60 × 10 mm faces.

The listed 17.66 lb pull force is a comparison value under defined contact conditions, not a guaranteed safe working load. Air gap, target-steel thickness, surface roughness, coating layers, temperature, and shear loading can all reduce usable force. Use the Magnet Pull Force Calculator for preliminary screening and the Neodymium Magnet Grades Chart when comparing grades.

Procurement and custom coated blocks

Browse stocked block and bar magnets for related dimensions and coatings, or use the Magnet RFQ Builder for custom size, epoxy systems, tolerances, magnetization, or production quantities.